Home > New Products
New products available at The Robot Space
Sort By:
Page of 2
VRC Turning Point - Scoring Element Kit
VRC Turning Point - Scoring Element Kit
Our Price: $5.99

Spare game elements for use in VRC Turning Point. Other field elements not included.

  • (1) Cap Assembly
  • (1) 3" Plastic Ball

VRC Turning Point - Game Element Kit
VRC Turning Point - Game Element Kit
Our Price: $39.99

This kit includes half of the game elements needed for a full VRC Turning Point field.

Note: Field Elements, Field Perimeter & Tiles NOT included.

  • (4) Cap Assemblies
  • (10) Balls

Note: (2) kits must be purchased to have a full field of game elements.


VRC Turning Point - Pipe Kit
VRC Turning Point - Pipe Kit
Our Price: $59.99

Pipe Kit (276-5681)

  • (7) 1/2" x 58" Black Pipes
  • (6) 1/2" x 47" Black Pipes
  • (2) 1/2" x 34" Black Pipes
  • (6) 1/2" x 23" Black Pipes


Note: Game Elements, Field Perimeter & Tiles NOT included.

VRC Turning Point - Field Elements Kit 2
VRC Turning Point - Field Elements Kit 2
Our Price: $129.99

Field Element Kit 2 (276-6115)

  • (1) Cap Assembly
  • (1) White Tape (2" wide)
  • (12) Platform Corner Connectors
  • (24) #8-32 x 2" Standoffs
  • (9) Red Flag Leafs
  • (9) Blue Flag Leafs
  • (1) VRC License Plate Kit
  • All Required Field and Assembly Hardware


Note: Game Elements, Field Perimeter & Tiles NOT included.

VRC Turning Point - Field Elements Kit 1
VRC Turning Point - Field Elements Kit 1
Our Price: $229.99

Field Element Kit 1 (276-5679)

  • (3) Polycarbonate Platform Tops
  • (2) Platform Ball Deflectors
  • (1) Nylon Net
  • (42) 4" One-Wrap Velcro™ Strips
  • (2) 3" Plastic Balls
  • (1) Red Tape (2" wide)
  • (1) Blue Tape (2" wide)
  • (4) 2" x 16" Yellow Platform Pipes
  • (4) 2" x 16" Blue Platform Pipes
  • (4) 2" x 16" Red Platform Pipes
  • (1) 1/2" x 9.125" Orange Pipe
  • (1) 1/2" x 11.25" Orange Pipe
  • (23) 0.5" Pipe Wall Clamps
  • (23) #8-32 Field Perimeter Hole Adapters
  • (4) 0.5" Pipe Straight Connectors
  • (22) 0.5" Pipe Clip Halves
  • (12) 0.5" Clamping Flag Bases
  • (22) Field Perimeter Rubber Feet
  • (9) Flag Stems
  • (7) Small Circle Base Plates
  • (2) 0.5" Pipe Interfacing Field Gusset Corners


Note: Game Elements, Field Perimeter & Tiles NOT included.

VIQC Next Level - Scoring Element Kit
VIQC Next Level - Scoring Element Kit
Our Price: $2.99

Spare Hub for teams who want to practice VEX IQ Challenge Next Level.

  • (1) Hub

VIQC Next Level - Full Field & Game Element Kit
VIQC Next Level - Full Field & Game Element Kit
Our Price: $99.99

All the field elements & game objects needed to build a complete VEX IQ Challenge Next Level field. One Full Field Set.

  • (15) Orange Hubs
  • (2) Yellow Hubs
  • (1) Hanging Bar Assembly Kit
  • (1) Field Terrain Assembly Kit
  • (1) Rectangular Building Zone Assembly Kit
  • (1) Square Building Zone Assembly Kit
  • (1) Scoring Number Pack
  • All necessary Build Instructions

Note: VEX IQ Challenge Field Perimeter & Tiles not included.


VersaPlanetary Ratchet Kit
VersaPlanetary Ratchet Kit
Our Price: $14.99

.
VersaPlanetary Lite Base Kit, 1:1, Universal Female Output Shaft
VersaPlanetary Lite Base Kit, 1:1, Universal Female Output Shaft
Our Price: $24.99

Powerpole Ratcheting Crimper
Powerpole Ratcheting Crimper
Our Price: $49.99

Powerpole Ratcheting Wire Crimper Tools for 15, 30 and 45 Amp Anderson Cable Connectors with 10 Pairs 30 AMP Powerpole Connectors
VersaRoller 1/2” Hex Hub Insert, 3/8" Hex Shaft x 2-5/8” Long
VersaRoller 1/2” Hex Hub Insert, 3/8" Hex Shaft x 2-5/8” Long
Our Price: $7.99

VersaRoller 1/2” Hex Hub Insert, 1/2" Hex Shaft x 2-1/2” Long
VersaRoller 1/2” Hex Hub Insert, 1/2" Hex Shaft x 2-1/2” Long
Our Price: $6.99

VersaRoller 1/2” Hex Hub Insert, 1/2" Hex Shaft x 7/8” Long
VersaRoller 1/2” Hex Hub Insert, 1/2" Hex Shaft x 7/8” Long
Our Price: $4.99

VersaRoller 1/2” Hex Hub Insert, 5/16-18 Tapped Hole
VersaRoller 1/2” Hex Hub Insert, 5/16-18 Tapped Hole
Our Price: $3.99

VersaRoller Hub, 1/2" Hex Bore x 1-1/8" OD (Plastic)
VersaRoller Hub, 1/2" Hex Bore x 1-1/8" OD (Plastic)
Our Price: $3.99

VersaRoller Hub, 1/2" Hex Bore x 1-1/8" OD (Aluminum)
VersaRoller Hub, 1/2" Hex Bore x 1-1/8" OD (Aluminum)
Our Price: $4.99

VersaRoller Tube, 1-¼” OD x 1-⅛” ID x 1/16” Wall (Aluminum, 59”)
VersaRoller Tube, 1-¼” OD x 1-⅛” ID x 1/16” Wall (Aluminum, 59”)
Our Price: $24.99

VersaRoller Tube, 1-¼” OD x 1-⅛” ID x 1/16” Wall (Plastic, 36”)
VersaRoller Tube, 1-¼” OD x 1-⅛” ID x 1/16” Wall (Plastic, 36”)
Our Price: $14.99

12t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, RS775 Motor)
12t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, RS775 Motor)
Our Price: $13.99


For RS775 Motor
12t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, RS550 Motor)
12t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, RS550 Motor)
Our Price: $13.99


For RS550 Motor
60t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, 1/2" Hex Bore)
60t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, 1/2" Hex Bore)
Our Price: $19.99

48t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, 1/2" Hex Bore)
48t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, 1/2" Hex Bore)
Our Price: $17.99

36t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, 1/2" Hex Bore)
36t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, 1/2" Hex Bore)
Our Price: $16.99

24t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, 1/2" Hex Bore)
24t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, 1/2" Hex Bore)
Our Price: $14.99

180t x 9mm Wide Timing Belt (GT2 3mm)
180t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $10.99

Note: picture is for illustrational purposes.
140t x 9mm Wide Timing Belt (GT2 3mm)
140t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $10.99

Note: picture is for illustrational purposes.
125t x 9mm Wide Timing Belt (GT2 3mm)
125t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $10.99

Note: picture is for illustrational purposes.
120t x 9mm Wide Timing Belt (GT2 3mm)
120t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $10.99

Note: picture is for illustrational purposes.
115t x 9mm Wide Timing Belt (GT2 3mm)
115t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $9.99

Note: picture is for illustrational purposes.
110t x 9mm Wide Timing Belt (GT2 3mm)
110t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $8.99

Note: picture is for illustrational purposes.
105t x 9mm Wide Timing Belt (GT2 3mm)
105t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $8.99

Note: picture is for illustrational purposes.
100t x 9mm Wide Timing Belt (GT2 3mm)
100t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $8.99

Note: picture is for illustrational purposes.
90t x 9mm Wide Timing Belt (GT2 3mm)
90t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $8.99

Note: picture is for illustrational purposes.
85t x 9mm Wide Timing Belt (GT2 3mm)
85t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $8.99

Note: picture is for illustrational purposes.
70t x 9mm Wide Timing Belt (GT2 3mm)
70t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $7.99

Note: picture is for illustrational purposes.
60t x 9mm Wide Timing Belt (GT2 3mm)
60t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $7.99

Note: picture is for illustrational purposes.
55t x 9mm Wide Timing Belt (GT2 3mm)
55t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $7.99

Note: picture is for illustrational purposes.
50t x 9mm Wide Timing Belt (GT2 3mm)
50t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $6.99

Note: picture is for illustrational purposes.
45t x 9mm Wide Timing Belt (GT2 3mm)
45t x 9mm Wide Timing Belt (GT2 3mm)
Our Price: $6.99

Note: picture is for illustrational purposes.
VersaBlock Mini Kit
VersaBlock Mini Kit
Our Price: $5.99

1" x 1" x 0.100" Pre-Drilled VersaFrame Plastic Tube Stock (59")
1" x 1" x 0.100" Pre-Drilled VersaFrame Plastic Tube Stock (59")
Our Price: $27.99

VersaPlanetary Universal Female Output Shaft Kit
VersaPlanetary Universal Female Output Shaft Kit
Our Price: $19.99

The VersaPlanetary Universal Female Output Shaft Kit allows users to drive a variety of shafts directly from the Gearbox. This allows users to create custom length output shafts that are longer than a standard set length.

This kit also includes adapters for three various shaft sizes:
1/2" Hex
3/8" Hex
1/4" Square
#35 Chain Tool
#35 Chain Tool
Our Price: $29.99

3/8" Hex x .165" ID ThunderHex Stock (36")
3/8" Hex x .165" ID ThunderHex Stock (36")
Our Price: $17.99

VersaPlanetary Lite Ring Gear
VersaPlanetary Lite Ring Gear
Our Price: $1.99

.302" (1/4" ThunderSquare) ID x 0.875" OD x 0.280" WD (Flanged Bearing)
.302" (1/4" ThunderSquare) ID x 0.875" OD x 0.280" WD (Flanged Bearing)
Our Price: $2.99

10.25mm (3/8" ThunderHex) ID x 0.875" OD x 0.280" WD (Flanged Bearing)
10.25mm (3/8" ThunderHex) ID x 0.875" OD x 0.280" WD (Flanged Bearing)
Our Price: $2.99

3/8" Hex Bore Plastic VersaHub
3/8" Hex Bore Plastic VersaHub
Our Price: $2.99

VEXpro VersaHubs provide frustration-free torque transfer between wheels, gears, sprockets, and shafts.
Got a 1/2" Hex that you need to put a plate sprocket on? No problem. Need to mount a 64-tooth gear to your Mecanum Wheel? We can do that. Whatever your need, these hubs will help you integrate everything together seamlessly.
Most of the wheels and sprockets that teams typically use (including the previous generation of VEXpro wheels) don't take piloting into account. We wanted to make sure that everything pilots correctly... every time. Wheels, hubs, gears, sprockets… they all work together.
VersaHubs include the innovative VersaKey mounting system -- VersaKeys transfer torque between coaxial items, and also ensure everything is piloted correctly.
1/2" VersaHex Adapters (3/8" Hex Bore, 1/8" Long) (6 Pack)
1/2" VersaHex Adapters (3/8" Hex Bore, 1/8" Long) (6 Pack)
Our Price: $4.99

VersaHex Adapters allows you to change any 1/2" Hex Bore product to either a 3/8" hex, 1/4" square or 6mm D Shaft bore. This means that you can run a GT2 pulley on a 3/8" Hex Shaft, a VEXpro Hub Sprocket on a VEX EDR High Strength Shaft or a VEXpro 20 DP gear on a 6mm D Shaft. Each type of VersaHex Adapters come in 1/8" and 1/4" lengths.
VersaPlanetary Lite Base Kit, 1:1, 3/8" Hex Output
VersaPlanetary Lite Base Kit, 1:1, 3/8" Hex Output
Our Price: $17.99

Ball Shifter Mag Encoder Mount Kit
Ball Shifter Mag Encoder Mount Kit
Our Price: $5.99

The Mag Encoder is a sensor that measures the rotational position and velocity of the shaft driving your mechanism. After releasing the Mag Encoder a few years ago, we received a ton of positive feedback from the FRC community. However, you also told us that there was not an easy way to actually mount the mag encoder to a ball shifter. That is now a thing of the past with the Ball Shifter Mag Encoder Mount.

This mount allows users to easily mount a Mag Encoder to any existing VEXpro Ball Shifter. No need to modify any of the Ball Shifters that you already own! Now you can easily add a Mag Encoder to your ball shifter, and it only takes a few minutes to install.
Victor SPX
Victor SPX
Our Price: $49.99

The Victor 883 Motor Controller, revolutionary for its time, was the first product ever designed by Innovation First. Nearly twenty years later, the Victor SPX is the fifth generation of motor controllers designed for the FIRST® Robotics Competition. Designed in collaboration with CTR Electronics, the Victor SPX is 10% smaller and 25% lighter than the Victor SP, making it the smallest and lightest motor controller in FIRST Robotics Competition history.

In addition to PWM, this next generation of Victor now supports CAN. The Victor SPX also brings over many of the features from the Talon, including voltage control and closed loop position control.

Each Victor SPX comes with male and female 0.1" servo connectors on the ends of the CAN wires, making it easier for FIRST Robotics Competition teams to connect their Victor SPX to the CAN bus network that is already on their robot. Teams that aren't ready to make the jump to CAN bus can use these connectors to connect to the PWM outputs of the roboRIO (female connector) and the VEX ARM® Cortex®-based Microcontroller (male connector).

Other features include:

  • Follow mode - allows Victors and Talons to follow each other
  • Programmable deadband - set the deadband of your Victor SPX from 25% down to 0.1%, the lowest deadband of any FIRST® Robotics Competition motor controller in the market.
  • Closed Loop position control using CAN based sensors such as the Pigeon IMU.

775 Connect
775 Connect
Our Price: $7.75


775 Connect - Inline Adapter Kit for Anderson Powerpole Connectors -
Designed by The Robot Space
HEXBUG BATTLEBOTS ARENA
HEXBUG BATTLEBOTS ARENA
Our Price: $79.99

Watch action-packed matches unfold inside this arena, a perfect place to put a collection of the world’s most destructive machines against one another!

The lights dim as the audience roars, you have just entered the ultimate robot showdown! Modeled after television’s favorite metallic war-zone comes HEXBUG® BattleBots® Arena™.

  • Two push activated pulverizing hammers
  • Battle-worn detachable robot pieces
  • BattleBots I/R Witch Doctor included
  • BattleBots I/R Tombstone included
  • Realistic protective walls
  • Fold-out game board
  • Batteries Included
  • Ages 8 and up

HEXBUG BattleBots Arena is compliant with CPSIA standards. Batteries Included. Two LR44's included in in each remote. Ages 8 and up.

VRC In the Zone - Field Pipe Kit
VRC In the Zone - Field Pipe Kit
Our Price: $20.00

.
VRC In the Zone - Field Element Kit
VRC In the Zone - Field Element Kit
Our Price: $159.99

.
VRC In the Zone - Game Element Kit
VRC In the Zone - Game Element Kit
Our Price: $79.99

.
VEX ANT by HEXBUG
VEX ANT by HEXBUG
Our Price: $49.99

Design, Build, Drive and Program!

VEX Robotics by HEXBUG encourages STEM learning through hands-on play as you construct your very own jumbo-sized robot and customize its programming! The Ant kit includes over 150 snap together pieces and a centralized brain to bring it to life. Drive the robot manually with a remote control, or choose autonomous drive mode and watch the Ant scurry around all by itself, mimicking real-life movement. This kit is cross-compatible with other VEX Robotics kits.

VEX Robotics Ant is compliant with CPSIA standards. Ages 8+

VEX Motor Kit
VEX Motor Kit
Our Price: $19.99

Tired of operating VEX Robotics Ball Machine by hand?

Want to power up multiple machines at once? The VEX® Robotics Motor Kit by HEXBUG® will give your machines a surge of power! Each kit includes a powerful motor with an inline on and off switch that allow you to put your machines to work while you watch. The VEX® Robotics Motor Kit is a great enhancement for all of the VEX® Robotics Ball Machines.

VEX Robotics Robotic Arm is compliant with CPSIA standards. Ages 8+

VEX Snap Shot
VEX Snap Shot
Our Price: $19.99

Sneak up on friend or foe with the VEX® Robotics Snap Shot™.


Wield the power to defend your turf by building your own handheld space blaster! Watch as the ammo drops down and secures into position. Lock target, aim, and send projectiles flying over ten feet for long-range attacks!


VEX Robotics Snap Shot is compliant with CPSIA standards. Ages 14+

VEX Catapult
VEX Catapult
Our Price: $19.99

Build the Catapult™ from over 100 VEX® robotics pieces!

In 100BC, Greek and Roman engineers changed the face of battle with the invention of the most powerful long-range weapon the world had ever seen. Now kids everywhere can experience the thrill of launching objects with the VEX® Robotics Catapult by HEXBUG®!

Two balls included. Batteries not required.

VEX Robotics Catapult is compliant with CPSIA standards. Ages 14+

VEX Crossbow
VEX Crossbow
Our Price: $19.99

Build the Crossbow™ from over 150 VEX® robotics pieces!


Feel the rush of commanding your own legion with the VEX® Robotics Crossbow by HEXBUG®, inspired by the ancient Roman and Greek ballista from 100BC! This modern machine still uses the same ancient mechanics that helped Rome's greatest generals rule the battlefield.


Two foam darts included. Batteries not required.


VEX Robotics Crossbow is compliant with CPSIA standards. Ages 14+

VEX Zip Flyer
VEX Zip Flyer
Our Price: $12.99

Ready? Set. Take to the sky! Introducing the VEX® Robotics Zip Flyer™, a re-envisioned take on airborne adventures.


This robotic gadget is capable of shooting propellers over 30 feet in the air! Pull the zip-cord stick to release, the faster you pull, the higher they’ll go. The excitement doesn’t stop there, the VEX Robotics Zip Flyer can be built for both hand-held and tabletop action. Two ways to build, two ways to launch.


VEX® Robotics Zip Flyer™ by HEXBUG is compliant with CPSIA standards. Ages 8+

Rack Gear v2 (16-pack)
Rack Gear v2 (16-pack)
Our Price: $19.99

Now with a new design! The Rack Gear v2 is wider and thereby more compatible with VEX High Strength gears. v2 has also eliminated the brass inserts from the original design, and replaced them with molded-in nut pockets. Now you can use 8-32 screws!
Cube Kit
Cube Kit
Our Price: $29.99

A set of 3-inch cubes that can be used as part of VEX IQ Challenge Highrise, to build a color-sorter, or disassembled and used on a robot.

  • (6) Red Cubes
  • (6) Blue Cubes
  • (6) Green Cubes

Note: A full Highrise field uses (2) Cube Kits.

VIQC Crossover - Game Element Kit
VIQC Crossover - Game Element Kit
Our Price: $29.99

Spare Hexballs for teams who want to practice VEX IQ Challenge Crossover (2016-2017).

This kit includes (14) Hexballs, or half the amount used on a competition field.


  • (7) Blue Hexballs
  • (7) Orange Hexballs
Weidmuller Ferrule Crimper
Weidmuller Ferrule Crimper
Our Price: $26.99

Weidmuller Ferrule - 20 AWG (20 pack)
Weidmuller Ferrule - 20 AWG (20 pack)
Our Price: $3.99

Weidmuller Ferrule - 18 AWG (20 pack)
Weidmuller Ferrule - 18 AWG (20 pack)
Our Price: $3.99

Single Super Slick Offensive Reversible Bumper Material
Single Super Slick Offensive Reversible Bumper Material
Our Price: $25.00

Single Reversible Bumper
Single Reversible Bumper
Our Price: $22.00

Number 8 - Iron On Bumper Numbers (set of 4)
Number 8 - Iron On Bumper Numbers (set of 4)
Our Price: $6.00

Includes a set of 4 - Number 8
Number 7 - Iron On Bumper Numbers (set of 4)
Number 7 - Iron On Bumper Numbers (set of 4)
Our Price: $6.00

Includes a set of 4 - Number 7
Number 6/9 - Iron On Bumper Numbers (set of 4)
Number 6/9 - Iron On Bumper Numbers (set of 4)
Our Price: $6.00

Includes a set of 4 - Number 6/9
Number 5 - Iron On Bumper Numbers (set of 4)
Number 5 - Iron On Bumper Numbers (set of 4)
Our Price: $6.00

Includes a set of 4 - Number 5
Number 4 - Iron On Bumper Numbers (set of 4)
Number 4 - Iron On Bumper Numbers (set of 4)
Our Price: $6.00

Includes a set of 4 - Number 4
Number 3 - Iron On Bumper Numbers (set of 4)
Number 3 - Iron On Bumper Numbers (set of 4)
Our Price: $6.00

Includes a set of 4 - Number 3
Number 2 - Iron On Bumper Numbers (set of 4)
Number 2 - Iron On Bumper Numbers (set of 4)
Our Price: $6.00

Includes a set of 4 - Number 2
Number 1 - Iron On Bumper Numbers (set of 4)
Number 1 - Iron On Bumper Numbers (set of 4)
Our Price: $6.00

Includes a set of 4 - Number 1
Number 0 - Iron On Bumper Numbers (set of 4)
Number 0 - Iron On Bumper Numbers (set of 4)
Our Price: $6.00

Includes a set of 4 - Number 0
22AWG CAN Wire (25-feet)
22AWG CAN Wire (25-feet)
Our Price: $6.99

12awg Green Silicone Wire (25-feet)
12awg Green Silicone Wire (25-feet)
Our Price: $29.99

12awg White Silicone Wire (25-feet)
12awg White Silicone Wire (25-feet)
Our Price: $29.99

Corner Bumper Cover (BLUE)
Corner Bumper Cover (BLUE)
Our Price: $15.00

Corner Bumper Cover (RED)
Corner Bumper Cover (RED)
Our Price: $15.00

Corner Bumper Kit (BLUE)
Corner Bumper Kit (BLUE)
Our Price: $28.00

Corner Bumper Kit (RED)
Corner Bumper Kit (RED)
Our Price: $28.00

Defensive Bumper Fabric (BLUE)
Defensive Bumper Fabric (BLUE)
Our Price: $22.00

Defensive Bumper Fabric (RED)
Defensive Bumper Fabric (RED)
Our Price: $22.00

Super Slick Offensive Bumper Fabric (RED)
Super Slick Offensive Bumper Fabric (RED)
Our Price: $22.00

Super Slick Offensive Bumper Fabric (BLUE)
Super Slick Offensive Bumper Fabric (BLUE)
Our Price: $22.00

Standard Bumper Fabric (RED)
Standard Bumper Fabric (RED)
Our Price: $18.00

Standard Bumper Fabric (BLUE)
Standard Bumper Fabric (BLUE)
Our Price: $18.00

CAN Connector (5-pack)
CAN Connector (5-pack)
Our Price: $23.99

The CAN Connector joins together two CAN devices. For devices that support a CAN bus (such as the Talon SRX), the CAN Connector can be used to "daisy chain" multiple devices together. See Section 1.3.2 of the Talon SRX User's Guide for more details.
1" x 2" x 0.100" Pre-Drilled VersaFrame Plastic Tube Stock (59")
1" x 2" x 0.100" Pre-Drilled VersaFrame Plastic Tube Stock (59")
Our Price: $34.99

3.25" Omni-Directional Wheels
3.25" Omni-Directional Wheels
Our Price: $17.99

Small is the new cool! New 3.25" diameter Omni-Directional Wheel provides more flexibility for drivetrain or mechanism designs
SRX Mag Encoder
SRX Mag Encoder
Our Price: $39.99

The Cross the Road Electronics SRX Mag Encoder is a rotary sensor that can be used to measure rotational position and velocity. The device senses the magnetic field of a diametrically polarized magnet to determine rotational position with 12 bit precision. The device provides both a Quadrature interface that may be used for relative position measurement and a Pulse Width Modulated output for absolute position measurement. The device connects directly to the Talon SRX data port and is directly supported in the Talon SRX firmware.
775pro
775pro
Our Price: $19.99

The 775pro motor was designed in collaboration with West Coast Products. Including dual bearings, this open-case motor is more efficient than similar ones on the market. We've packed the power of a CIM Motor into a small and lightweight package.
VersaDrop
VersaDrop
Our Price: $129.99

VersaPlanetary Integrated Encoder
VersaPlanetary Integrated Encoder
Our Price: $49.99