Home > VEXpro > Wheels & Hubs > VersaWheels

VersaWheels offer superior traction performance while maintaining an accessible price point. The integrated VersaKey pattern allows for the mounting of sprockets or gears on each side of the wheel without additional VersaHubs. VersaWheel DTs come with an optional 1/2" hex bore, which allows for direct-drive of the wheel without any additional hub.

The original VersaWheel uses a custom "W" tread pattern, specially designed to maximize traction on FRC carpet. The VersaWheel DT's feature an all-new split diamond tread pattern for additional performance and wear-resistance through even the toughest competition.

  • Custom "W" tread pattern is specifically designed for FRC carpet
  • VersaWheel DT's feature a diamond tread pattern for greater wear resistance
Sort By:
Page of 1
.302" (1/4" ThunderSquare) ID x 0.875" OD x 0.280" WD (Flanged Bearing)
.302" (1/4" ThunderSquare) ID x 0.875" OD x 0.280" WD (Flanged Bearing)

Our Price: $2.99
In Stock
Qty Add
1" x 2" x 0.100" Pre-Drilled VersaFrame Plastic Tube Stock (59")
1" x 2" x 0.100" Pre-Drilled VersaFrame Plastic Tube Stock (59")

Our Price: $34.99
In Stock
Qty Add
1/2" Hex x 0.201" ID ThunderHex Stock (18")
1/2" Hex x 0.201" ID ThunderHex Stock (18")
.

Our Price: $9.99
In Stock
Qty Add
1/2" Hex x 0.201" ID ThunderHex Stock (36")
1/2" Hex x 0.201" ID ThunderHex Stock (36")
.

Our Price: $15.99
In Stock
Qty Add
10.25mm (3/8" ThunderHex) ID x 0.875" OD x 0.280" WD (Flanged Bearing)
10.25mm (3/8" ThunderHex) ID x 0.875" OD x 0.280" WD (Flanged Bearing)

Our Price: $2.99
(Out of Stock)
Qty Add
13.73mm (1/2" Tight Press ThunderHex ID) x 1.125" OD x 0.313" WD (Flanged Bearing, 11 Pack)
13.73mm (1/2" Tight Press ThunderHex ID) x 1.125" OD x 0.313" WD (Flanged Bearing, 11 Pack)
.

Our Price: $12.99
(Out of Stock)
Qty Add
13.75mm (1/2" ThunderHex ID) x 1.125" OD x 0.313" WD (Flanged Bearing)
13.75mm (1/2" ThunderHex ID) x 1.125" OD x 0.313" WD (Flanged Bearing)
.

Our Price: $4.99
(Out of Stock)
Qty Add
3.25" Omni-Directional Wheel
3.25" Omni-Directional Wheel
Small is the new cool! New 3.25" diameter Omni-Directional Wheel provides more flexibility for drivetrain or mechanism designs

Our Price: $17.99
In Stock
Qty Add
3/8" Hex x .165" ID ThunderHex Stock (36")
3/8" Hex x .165" ID ThunderHex Stock (36")

Our Price: $17.99
In Stock
Qty Add
VersaDrop
VersaDrop

Our Price: $129.99
(Out of Stock)
Qty Add
VersaPlanetary Lite Base Kit, 1:1, 3/8" Hex Output
VersaPlanetary Lite Base Kit, 1:1, 3/8" Hex Output

Our Price: $17.99
In Stock
Qty Add
VersaPlanetary Lite Base Kit, 1:1, Universal Female Output Shaft
VersaPlanetary Lite Base Kit, 1:1, Universal Female Output Shaft

Our Price: $24.99
In Stock
Qty Add
VersaPlanetary Lite Ring Gear
VersaPlanetary Lite Ring Gear

Our Price: $1.99
In Stock
Qty Add
VersaPlanetary Ratchet Kit
VersaPlanetary Ratchet Kit
.

Our Price: $14.99
In Stock
Qty Add
VersaPlanetary Universal Female Output Shaft Kit
VersaPlanetary Universal Female Output Shaft Kit
The VersaPlanetary Universal Female Output Shaft Kit allows users to drive a variety of shafts directly from the Gearbox. This allows users to create custom length output shafts that are longer than a standard set length.

This kit also includes adapters for three various shaft sizes:
1/2" Hex
3/8" Hex
1/4" Square

Our Price: $19.99
In Stock
Qty Add
VersaWheel (4'')
VersaWheel (4'')

Our Price: $5.99
In Stock
Qty Add
VersaWheel DT (3.25")
VersaWheel DT (3.25")

Our Price: $6.99
In Stock
Qty Add
VersaWheel DT (3.25", 1/2" Hex bore)
VersaWheel DT (3.25", 1/2" Hex bore)

Our Price: $6.99
In Stock
Qty Add
VersaWheel DT (4'')
VersaWheel DT (4'')

Our Price: $6.99
In Stock
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
   
 
Specification Mounting Holes: (6) 0.169" clearance holes on a 1.875" bolt circle
Bore: 1.125" OD Bearing Hole or 1/2" Hex
Load Rating: Conservatively rated for use on 200 lb robots
Coefficient of Friction: 1.2
Coefficient of Friction (DT): 1.0
Material Type Hub (Original): Glass-filled Nylon
Hub (DT): Polypropylene
Tread: TPR 65-Shore
CAD Model 4" VersaWheel (STEP File)
4" VersaWheel DT (STEP File)
3.25" VersaWheel DT (STEP File)
3.25", 1/2" Hex bore VersaWheel DT(STEP File)