Home > VEXpro > Motors & Controllers

775 Connect
775 Connect

775 Connect - Inline Adapter Kit for Anderson Powerpole Connectors -
Designed by The Robot Space

Our Price: $7.75
In Stock
Qty Add
775pro
775pro
The 775pro motor was designed in collaboration with West Coast Products. Including dual bearings, this open-case motor is more efficient than similar ones on the market. We've packed the power of a CIM Motor into a small and lightweight package.

Our Price: $17.99
In Stock
Qty Add
Anderson Powerpole Contacts (10 Pack)
Anderson Powerpole Contacts (10 Pack)

Recommended for use with 12-14 gauge wire.

Kit Includes:
  • 10 Contacts
Assembly Information
Technical Specifications

Our Price: $3.50
Qty Add
Anderson Powerpole Kit -  (2 Red / 2 Black / 4 Contacts)
Anderson Powerpole Kit - (2 Red / 2 Black / 4 Contacts)

Recommended for use with 12-14 gauge wire.

Kit Includes:
  • 2 Red Housings
  • 2 Black Housings
  • 4 Contacts
Assembly Information
Technical Specifications

Our Price: $3.50
Qty Add
BAG Motor
BAG Motor

Our Price: $24.99
In Stock
Qty Add
Ball Shifter Mag Encoder Mount Kit
Ball Shifter Mag Encoder Mount Kit
The Mag Encoder is a sensor that measures the rotational position and velocity of the shaft driving your mechanism. After releasing the Mag Encoder a few years ago, we received a ton of positive feedback from the FRC community. However, you also told us that there was not an easy way to actually mount the mag encoder to a ball shifter. That is now a thing of the past with the Ball Shifter Mag Encoder Mount.

This mount allows users to easily mount a Mag Encoder to any existing VEXpro Ball Shifter. No need to modify any of the Ball Shifters that you already own! Now you can easily add a Mag Encoder to your ball shifter, and it only takes a few minutes to install.

Our Price: $5.99
In Stock
Qty Add
CAN Connector (5-pack)
CAN Connector (5-pack)
The CAN Connector joins together two CAN devices. For devices that support a CAN bus (such as the Talon SRX), the CAN Connector can be used to "daisy chain" multiple devices together. See Section 1.3.2 of the Talon SRX User's Guide for more details.

Our Price: $19.99
In Stock
Qty Add
CIM Motor
CIM Motor

The CIM motor can be used to power a drivetrain or other mechanism on large competitive robots.

  • FRC Legal
  • 12V DC Motor

Our Price: $27.99
In Stock
Qty Add
Circuit Breaker  20 Amp
Circuit Breaker 20 Amp

Our Price: $4.99
In Stock
Qty Add
Circuit Breaker  30 Amp
Circuit Breaker 30 Amp

Our Price: $4.99
In Stock
Qty Add
Circuit Breaker  40 Amp
Circuit Breaker 40 Amp

Our Price: $4.99
(Out of Stock)
Qty Add
Jaguar Motor Controller
Jaguar Motor Controller

Our Price: $69.99
(Out of Stock)
Qty Add
Mini CIM Motor
Mini CIM Motor

Our Price: $24.99
In Stock
Qty Add
Power Distribution Panel
Power Distribution Panel

The Power Distribution Panel (PDP) from Cross the Road Electronics is the latest DC power interface for competition robotics. The PDP uses CAN to connect directly to the roboRIO and allows for individual current monitoring on each channel.

  • (8) 40A and (8) 20/30A channels
  • Individual protection for the roboRIO and VRM/PCM
  • Designed to work with the roboRIO FRC control system

Our Price: $204.99
In Stock
Qty Add
Powerpole Ratcheting Crimper
Powerpole Ratcheting Crimper
Powerpole Ratcheting Wire Crimper Tools for 15, 30 and 45 Amp Anderson Cable Connectors with 10 Pairs 30 AMP Powerpole Connectors

Our Price: $49.99
Qty Add
Spare 20A Fuse for Spike (5-pack)
Spare 20A Fuse for Spike (5-pack)

Our Price: $3.49
(Out of Stock)
Qty Add
Spike H-Bridge Relay
Spike H-Bridge Relay

Spike is a 20 Amp, H-Bridge Relay Module that is small enough to be remotely mounted almost anywhere on your robot. Spike is designed for driving small motors in forward, reverse, or stop (brake). Spike is opto-isolated at the signal input to protect the Robot Controller against motor noise and return currents. Requires a 3-wire cable for connection to the Robot Controller.

  • Ideal for 2 independent solenoids, light, pumps.
  • Design will accept auto-resetting circuit breaker.
  • Compact design.

Our Price: $34.95
(Out of Stock)
Qty Add
SRX Mag Encoder
SRX Mag Encoder
The Cross the Road Electronics SRX Mag Encoder is a rotary sensor that can be used to measure rotational position and velocity. The device senses the magnetic field of a diametrically polarized magnet to determine rotational position with 12 bit precision. The device provides both a Quadrature interface that may be used for relative position measurement and a Pulse Width Modulated output for absolute position measurement. The device connects directly to the Talon SRX data port and is directly supported in the Talon SRX firmware.

Our Price: $39.99
(Out of Stock)
Qty Add
Talon SRX
Talon SRX

The Talon SRX offers the latest in smart speed controller technology compressed into a robust, compact package. This latest iteration of the popular Talon platform from Cross the Road Electronics adds support for CAN, additional communication protocols, and integrated PID control.

The Talon SRX was co-developed through a collaborative partnership between VEX Robotics and Cross the Road Electronics. Click here to learn more about this exciting partnership.

  • Includes support for several communication protocols
  • Onboard PID algorithms grant quick access to advanced control
  • Compact, lightweight package is ideal for competitive robotics

Our Price: $89.99
In Stock
Qty Add
Talon SRX Analog Breakout Board
Talon SRX Analog Breakout Board
This breakout board makes wiring 5V analog sensors to the Talon SRX quick and easy. When connected to the Talon SRX through a ribbon cable, the breakout board provides solder pads to help connect your necessary sensors. This breakout board is designed specifically for use with the Talon SRX - it scales a native 5V analog signal to a Talon SRX compliant 3.3V, helping 5V magnetic shaft encoders to "just work" without additional circuitry.

See section 1.4.7 of the Talon SRX User's Guide for more details.

Our Price: $11.99
In Stock
Qty Add
Talon SRX Data Cable (4-pack)
Talon SRX Data Cable (4-pack)
This 12" long cable is designed specifically for the 2x5 pin data port on the Talon SRX to provide external inputs. It can be used to connect the Talon SRX to feedback devices such as potentiometers, limit switches, analog & quadrature encoders as well as providing other future expansions options beyond what is currently supported.

Our Price: $14.99
In Stock
Qty Add
Talon SRX Encoder Breakout Board
Talon SRX Encoder Breakout Board
This breakout board makes wiring a quadrature encoder or limit switch to the Talon SRX quick and easy. When connected to the Talon SRX through a ribbon cable , the breakout board provides solder pads for quadrature encoders (on the top) and limit switches (on the bottom).

See section 1.4.6 of the Talon SRX User's Guide for more details.

Our Price: $9.99
In Stock
Qty Add
VersaPlanetary Dual Motor Input Hardware Kit
VersaPlanetary Dual Motor Input Hardware Kit

Our Price: $9.99
(Out of Stock)
Qty Add
VersaPlanetary Integrated Encoder
VersaPlanetary Integrated Encoder

Our Price: $49.99
(Out of Stock)
Qty Add
Victor 888 Motor Controller
Victor 888 Motor Controller

Our Price: $59.99
(Out of Stock)
Qty Add
Victor SP
Victor SP

The Victor SP is the latest member of the Victor Motor Controller product line. This latest iteration features completely overhauled internals and an innovative case less than half the size of previous models.

The Victor SP was co-developed through a collaborative partnership between VEX Robotics and Cross the Road Electronics and includes many of the enhancements popularized by the Talon SR. Click here to learn more about this exciting partnership.

  • Sealed enclosure prevents debris from getting inside
  • Convenient one-touch Brake / Coast Calibration button
  • Compact, lightweight package is ideal for competitive robotics

Our Price: $59.99
(Out of Stock)
Qty Add
Victor SPX
Victor SPX

The Victor 883 Motor Controller, revolutionary for its time, was the first product ever designed by Innovation First. Nearly twenty years later, the Victor SPX is the fifth generation of motor controllers designed for the FIRST® Robotics Competition. Designed in collaboration with CTR Electronics, the Victor SPX is 10% smaller and 25% lighter than the Victor SP, making it the smallest and lightest motor controller in FIRST Robotics Competition history.

In addition to PWM, this next generation of Victor now supports CAN. The Victor SPX also brings over many of the features from the Talon, including voltage control and closed loop position control.

Each Victor SPX comes with male and female 0.1" servo connectors on the ends of the CAN wires, making it easier for FIRST Robotics Competition teams to connect their Victor SPX to the CAN bus network that is already on their robot. Teams that aren't ready to make the jump to CAN bus can use these connectors to connect to the PWM outputs of the roboRIO (female connector) and the VEX ARM® Cortex®-based Microcontroller (male connector).

Other features include:

  • Follow mode - allows Victors and Talons to follow each other
  • Programmable deadband - set the deadband of your Victor SPX from 25% down to 0.1%, the lowest deadband of any FIRST® Robotics Competition motor controller in the market.
  • Closed Loop position control using CAN based sensors such as the Pigeon IMU.


Our Price: $49.99
In Stock
Qty Add
Voltage Regulator Module
Voltage Regulator Module

The Voltage Regulator Module from Cross the Road Electronics provides access to different constant voltages for custom sensors, cameras, or other unique applications.


Our Price: $44.99
In Stock
Qty Add
Weidmuller Ferrule - 18 AWG (20 pack)
Weidmuller Ferrule - 18 AWG (20 pack)

Our Price: $3.99
In Stock
Qty Add
Weidmuller Ferrule - 20 AWG (20 pack)
Weidmuller Ferrule - 20 AWG (20 pack)

Our Price: $3.99
In Stock
Qty Add
Weidmuller Ferrule Crimper
Weidmuller Ferrule Crimper

Our Price: $26.99
In Stock
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>