Home > VEX EDR > Control
Choose a sub category:
VEXnet Recievers
Cables Other
Control Accessories 
The Control Subsystem enables a human operator to maneuver the robot. Commands are issued through joysticks and buttons on the Transmitter, and sent via radio signal to the Receiver on the robot. In this way, the robot can be controlled through a combination of manual and autonomous methods.
Sort By:
Page of 1
Coiled Handset Cable
Coiled Handset Cable

Put your robot on tether and start testing. At VEX Competitions, you can not test your robot on the Practice Fields unless you have a Tether Cable - no crystal operations are allowed.

  • Connects the 75 MHz Transmitter to the Microcontroller.
  • 18" long unextended. 12' long stretched.
  • No crystals needed.
more info

Our Price: $6.99
In Stock
Qty Add
VEXnet Key 2.0
VEXnet Key 2.0

The VEXnet Key 2.0 provides wireless communication between VEX Microcontrollers and VEXnet Joysticks. This key utilizes the new VEXnet 2.0 communication protocol over a custom 2.4 GHz radio.

  • Works with the VEX Cortex Microcontroller
  • Uses VEXnet 2.0 communication protocol over 2.4 GHz data radio
  • Rubber fins help retain key once installed

The VEXnet Key 2.0 is a functionally identical replacement for the current VEXnet key. However, a link cannot use a first generation key on one side and a VEXnet Key 2.0 on the other side of the link.

Internal firmware on the VEXnet Key 2.0 is upgradeable - more information to come soon.

Note: The VEXnet Key 2.0 requires VEXnet Firmware v4.0 or higher on both the VEX Cortex Microcontroller and the VEXnet Joystick. This version includes support for both new and old keys. Visit www.vex.com/firmware to download.

more info

Our Price: $39.99
In Stock
Qty Add
V5 System Bundle
V5 System Bundle

Take your VEX EDR robot to the next level with the V5 System Bundle. This bundle includes everything you need to get started with V5, and is engineered to provide the most advanced robotics experience, right at your fingertips.

  • Designed to scale from the classroom to the competition field
  • Includes all necessary components to get started with the V5 System
  • (4) V5 Smart Motors included
  • Scalable programming software suite available with VEX Coding Studio

This kit (276-7000) has replaced the original V5 System Bundle (276-4800).

more info

Our Price: $549.99
In Stock
Qty Add
Partner Joystick
Partner Joystick

The Partner Joystick provides much of the functionality of the VEXnet Joystick without the VEXnet components. Connect the Partner Joystick to a VEXnet Joystick via the Partner Port to give two drivers control of an advanced robot or connect directly for to a VEX Microcontroller for tethered control.

  • (2) X-Y Analog Joysticks
  • (8) Top Buttons
  • (4) Back Buttons
more info

Our Price: $29.99
In Stock
Qty Add
4-Wire Extension Cable 12" (4-pack)
4-Wire Extension Cable 12" (4-pack)

Use these 4-Wire Extension Cables to connect VEX I2C Devices with the Cortex Microcontroller or to each other.

more info

Our Price: $19.99
In Stock
Qty Add
VEXnet Joystick
VEXnet Joystick

The VEXnet Joystick is the next generation of robot control for VEX Robots with the Cortex Microcontroller.

  • Wireless robot control using VEXnet technology.
  • Only compatible with the VEX Cortex Microcontroller.
  • (2) X-Y Analog Joysticks
  • (8) Top Buttons
  • (4) Back Buttons
  • (1) Internal Accelerometer
  • Link (2) joysticks together with (1) VEXnet USB Adapter Key.
  • When using multiple drivers to control a single robot, they must both be using the same type of transmitter -- the VEXnet Joystick and the 75MHz transmitter cannot be mixed.
more info

Our Price: $149.99
In Stock
Qty Add
USB A-A Cable
USB A-A Cable

Cable for connecting VEXnet components to sync and run in tether mode. Includes (1) 6ft VEX USB A-A Cable.

  • Works with the VEXnet Upgrade
  • Works with the VEX Cortex Microcontroller.
  • Works with the VEX ARM9 Microcontroller (available soon).
more info

Our Price: $9.99
In Stock
Qty Add
F-F 3-Wire Adapter (4-pack)
F-F 3-Wire Adapter (4-pack)

These 12" long 3-wire cables have female connectors on both ends. Use them for interfacing VEX components with other non-VEX systems.

more info

Our Price: $19.95
In Stock
Qty Add
V5 Controller
V5 Controller

Control your robot like never before with the cutting-edge V5 Controller. This controller packages two analog joysticks and 12 buttons into a familiar video-game style design. A rechargeable battery ensures enough charge to get you through multiple class periods or a full day of competition.

Other features include:

  • LCD Screen for real-time information
  • Start and stop programs from the controller
  • Programmable haptic feedback
  • Competition practice mode - sync up with other robots and run practice matches
  • Built-in VEXnet 3.0 radio and Bluetooth®
  • Integrated rechargeable battery
more info

Our Price: $99.99
In Stock
Qty Add
VEXnet USB Adapter Key
VEXnet USB Adapter Key
The VEXnet USB Adapter Key has been discontinued. The new VEXnet Key 2.0 is now available.

The VEXnet USB Adapter Key provides 802.11b/g wireless communication between VEX Microcontrollers and VEXnet Joysticks.

  • Works with the VEX Cortex Microcontroller.
  • Works with the VEX ARM9 Microcontroller.
more info

Our Price: $39.99
(Out of Stock)
Qty Add
VEXnet System Bundle
VEXnet System Bundle

The VEXnet System Bundle contains everything you need to get started controlling a VEX robot using the VEX Cortex Microcontroller.

  • (1) VEX Cortex Microcontroller
  • (1) VEXnet Joystick
  • (2) VEXnet USB Adapter Keys
  • (1) VEXnet Backup Battery Holder
  • (1) USB A-A Cable
more info

Our Price: $399.99
(Out of Stock)
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>