Home > VEX EDR > Structure
Choose a sub category:
Bundles Chassis
Hardware Metal
Plastic & Rubber
Structure Accessories 
The structural subsystem of the robot is responsible for physical support. It holds everything in place, and is, in effect, the durable “skeleton” of the robot to which all the other subsystems are attached. The Structure and Motion subsystems are very tightly integrated to form the chassis of the robot.
Sort By:
Page of 2
C-Channel 1x2x1x35 (2-pack)

VEX C-channel has holes on 0.500" increments. This structural member is perfect for building bigger robots. Excellent strength and twist resistance.

  • Three sizes available.
  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • Each channel is segmented into cuttable 2.5" pieces

Our Price: $8.99
In Stock
Qty Add
Spacer, 8mm (20-pack)

A spacer is used to create a space between two objects, often to properly position them. Available in various lengths.

  • Eliminate slop on shafts.
  • Add space between metal parts.
  • Plastic and Nylon.

Our Price: $2.99
In Stock
Qty Add
Spacer Variety Pack

A spacer is used to create a space between two objects, often to properly position them. Available in various lengths.

  • Eliminate slop on shafts.
  • Add space between metal parts.
  • Plastic and Nylon.

Our Price: $4.95
In Stock
Qty Add
Standoff 1.00" (10-pack)

A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads.

  • Hex size is 0.250" across the flats.
  • Light weight aluminum.
  • Various lengths available.

Our Price: $3.95
In Stock
Qty Add
Latex Tubing (10')

This VEX Tubing can stretch up to 3 times its length and still spring back to its original shape. VEX Latex Tubing is great for any application on a VEX robot requiring spring loading.

  • Sold in two 5' lengths.
  • 35A durometer Latex.
  • Great for heavy lifting.

Our Price: $9.99
In Stock
Qty Add
Screw 8-32 x 1.750" (50-pack)

8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Standard Allen Drive VEX screw type.
  • High Strength Stainless Steel.
Note: picture is for illustrational purposes.

Our Price: $9.99
In Stock
Qty Add
Standoff 5.00" (4-pack)

A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads.

  • Hex size is 0.250" across the flats.
  • Light weight aluminum.
  • Various lengths available.

Our Price: $8.95
In Stock
Qty Add
Screw 8-32 x 0.375" (100-pack)

8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Standard Allen Drive VEX screw type.
  • High Strength Stainless Steel.
Note: picture is for illustrational purposes.

Our Price: $7.49
In Stock
Qty Add
Battery Clip (4-pack)
Plastic mounting clip for attaching a VEX EDR 7.2V Robot Battery NiMH 3000mAh onto a robot. Mount two clips on your robot and simply snap your battery in and out.

Our Price: $4.99
In Stock
Qty Add
Standoff 6.00" (4-pack)

A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads.

  • Hex size is 0.250" across the flats.
  • Light weight aluminum.
  • Various lengths available.

Our Price: $9.95
In Stock
Qty Add
Screw 8-32 x 1.250" (50-pack)

8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Standard Allen Drive VEX screw type.
  • High Strength Stainless Steel.
Note: picture is for illustrational purposes.

Our Price: $7.49
In Stock
Qty Add
Thin Anti-Slip Mat

These high friction mats are cuttable and compressible. Use for adding grip, friction, or padding.

  • Available in two types, thin or thick.
  • Size is 12" x 15"

Our Price: $2.50
In Stock
Qty Add
Rubber Band #64 (10-pack)

#64 Rubber Bands have dozens of uses on a robot. The spring-like properties make it perfect for latches, triggers, and return mechanisms.

  • #64 Rubber Bands
  • Synthetic Rubber
  • Length is 3.5" x 1/4"

Our Price: $2.99
In Stock
Qty Add
Bar 1x25 (8-pack)

VEX bar with holes on 0.500" increments. Can be cut on 0.500" increments.

  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • The item is (8) to a package.

Our Price: $12.99
In Stock
Qty Add
90-Degree Gusset Set (4-pack)

Use these Gussets to connect VEX structural C-Channels and Angles at 90-degree connections.

  • Allows for greater mounting versatility using VEX Structural parts.
  • Includes (4) each of 90-Degree Gusset Angles and Plates.

Our Price: $12.99
In Stock
Qty Add
Hinge (2-pack)

This hinge provides a simple pivoting joint with 265 degree movement.

  • Sold in packs of 2.
  • 2.5" long x 1.3" wide.
  • Standard VEX holes.

Our Price: $9.99
In Stock
Qty Add
Rubber Band (20-pack)

#32 Rubber Bands have dozens of uses on a robot. The spring like properties make it perfect for latches, triggers, and return mechanisms.

  • #32 Rubber Bands
  • Synthetic Rubber
  • Length is 3"

Our Price: $1.49
In Stock
Qty Add
4" Zip Ties (100-pack)

Black Zip Ties used to hold together and manage cables, band rubber chords, or attach to rollers or tank tread to assist an intake mechanism. 1/10" wide x 4" long with a rating of 18lbs.

  • Tie together cables or rubber cords.
  • Attach to rollers or tank tread to assist an intake mechanism.
  • Rating of 18lbs.

Our Price: $4.99
In Stock
Qty Add
Plate 15x5 (2-pack)

Plate with holes on 0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments.

  • Available in two sizes.
  • Made from cold rolled steel, 0.046" thick, zinc plated.

Our Price: $4.99
In Stock
Qty Add
Plate 25x5 (4-pack)

Plate with holes on 0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments.

  • Available in two sizes.
  • Made from cold rolled steel, 0.046" thick, zinc plated.

Our Price: $14.99
In Stock
Qty Add
Screw 6-32 x 0.500" Silver (50-pack)

6-32 Screw with Button Head. 5/64" VEX Allen Drive. Various lengths.

  • Use for Motors and Servos only.
  • High Strength Stainless Steel.

Our Price: $4.95
In Stock
Qty Add
Screw 8-32 x 1.500" (50-pack)

8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Standard Allen Drive VEX screw type.
  • High Strength Stainless Steel.
Note: picture is for illustrational purposes.

Our Price: $7.49
In Stock
Qty Add
Screw 8-32 x 2.000" (25-pack)

8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Standard Allen Drive VEX screw type.
  • High Strength Stainless Steel.
Note: picture is for illustrational purposes.

Our Price: $7.49
In Stock
Qty Add
Nut 8-32 Keps (100-pack)

A nut is a type of hardware fastener with a threaded hole. All VEX nuts are 8-32 threads.

  • Keps Nuts have integral external tooth lock washer.

Our Price: $2.99
In Stock
Qty Add
Washer, Steel (200-pack)

A washer is a thin disk with a hole used to distribute the load of a threaded fastener. VEX washers fit on all VEX screws and VEX shafts.

  • Steel washers are a good all-purpose washer.
  • Telfon has low friction. Use on shafts where metal rubs on metal.

Our Price: $4.95
In Stock
Qty Add
Coupler 8-32 x 0.500" (25-pack)

The 8-32 Coupler is used to connect multiple Threaded Beams to each other. Now you can make custom length standoffs.

  • Double up standoffs
  • Allen socket in one end
  • 1/2" and 1" lengths

Our Price: $2.95
In Stock
Qty Add
Standoff 2.00" (10-pack)

A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads.

  • Hex size is 0.250" across the flats.
  • Light weight aluminum.
  • Various lengths available.

Our Price: $7.95
In Stock
Qty Add
Standoff 2.50" (4-pack)

A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads.

  • Hex size is 0.250" across the flats.
  • Light weight aluminum.
  • Various lengths available.

Our Price: $5.95
In Stock
Qty Add
Standoff 3.00" (4-pack)

A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads.

  • Hex size is 0.250" across the flats.
  • Light weight aluminum.
  • Various lengths available.

Our Price: $6.95
In Stock
Qty Add
Thick Anti-Slip Mat

These high friction mats are cuttable and compressible. Use for adding grip, friction, or padding.

  • Available in two types, thin or thick.
  • Size is 12" x 15"

Our Price: $2.50
In Stock
Qty Add
Angle Corner Gusset (4-pack)

Use these Angle Corner Gussets to attach VEX 2x2 Angles together at a 90-degree corner.

  • Useful for making structural corners on cubes!
  • Includes (4) Angle Corner Gussets.

Our Price: $19.99
In Stock
Qty Add
Spacer, 4.6mm (20-pack)

A spacer is used to create a space between two objects, often to properly position them. Available in various lengths.

  • Eliminate slop on shafts.
  • Add space between metal parts.
  • Plastic and Nylon.

Our Price: $2.99
In Stock
Qty Add
High Strength Shaft Spacer Kit

Spacers designed for use on VEX EDR High Strength Shafts. Spacers are often used to properly position objects on a shaft or to reduce friction between rotating objects.

  • Four sizes available
  • Eliminate slop on shafts
  • Add space between metal parts

Our Price: $9.99
In Stock
Qty Add
Drive Shaft Bar Lock (8-pack)

Metal version of the shaft locking part. Three locations for square shafts.

  • Very strong.
  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • Sold in packs of 8.

Our Price: $6.45
In Stock
Qty Add
Screw 8-32 x 0.250" (100-pack)

8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Standard Allen Drive VEX screw type.
  • High Strength Stainless Steel.
Note: picture is for illustrational purposes.

Our Price: $7.49
In Stock
Qty Add
Standoff 0.50" (10-pack)

A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads.

  • Hex size is 0.250" across the flats.
  • Light weight aluminum.
  • Various lengths available.

Our Price: $2.95
In Stock
Qty Add
Standoff 4.00" (4-pack)

A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads.

  • Hex size is 0.250" across the flats.
  • Light weight aluminum.
  • Various lengths available.

Our Price: $7.95
In Stock
Qty Add
Aluminum C-Channel 1x3x1x35 (6-pack)

VEX EDR C-Channel has holes on 0.500" increments. New for 2015, this 3-wide C-Channel is perfect for building robots with excellent strength and twist resistance. Having holes through the center of this C-Channel allows for symmetrical building along with the use of the shaft bearings in the horizontal or vertical position.


Our Price: $37.99
In Stock
Qty Add
Rack Gearbox Bracket (2-pack)

Uses the pinion gear to rotate the rack gear which will in turn slide linearly using the VEX Linear Slide Pack.

  • Create linear motion.
  • Gears and Motor sold separately.
  • Sold in a pack of two brackets.

Our Price: $9.99
In Stock
Qty Add
C-Channel 1x5x1x35 (4-pack)

VEX C-channel has holes on 0.500" increments. This structural member is perfect for building bigger robots. Excellent strength and twist resistance.

  • Three sizes available.
  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • Each channel is segmented into cuttable 2.5" pieces

Our Price: $19.99
In Stock
Qty Add
Screw 6-32 x 0.500" Locking (100-pack)

These screws have thread locker applied on their threads; this thread locker will help hold the screw in position. A Locking Screw can be installed and removed approximately 10-15 times and still retain a firm lock each time.

  • Use for Motors and Servos only.
  • High Strength Stainless Steel.

Our Price: $9.99
In Stock
Qty Add
8-32 x 0.125" Setscrew (32-pack)

These 8-32 x 0.125" setscrews fit in VEX Shaft Collars. Use them as replacements or spare parts.

  • 8-32 thread.
  • Use 5/64 Allen to tighten.

Our Price: $4.99
In Stock
Qty Add
C-Channel Coupler Gusset (8-pack)

Use these C-Channel Couplers to attach two VEX 1x2x1 C-Channels together in line to make longer structural pieces.

  • Allows for greater mounting versatility using VEX Structural parts.
  • Includes (8) C-Channel Coupler Gussets.

Our Price: $19.99
In Stock
Qty Add
Cinch Strap (5-pack)

These VELCRO�� brand Cinch Straps are great for quickly mounting objects. Wrap the Cinch Strap around the object you want mounted, loop it through the buckle, and then back onto itself for a secure hold using VELCRO�� brand hook and loop fastener. The buckle allows the user to "cinch" the strap tight around the application. The Cinch Straps are reusable and adjustable. Their secure holding circumference is adjustable from approximately 4 to 7 inches.

  • Quickly mount an object.
  • Adjustable and reusable.
  • Secure holding circumference approximately 4 to 7 inches.

Our Price: $9.99
In Stock
Qty Add
VELCRO Brand Adhesive Strip (5')

This adhesive VELCRO Brand product has an adhesive backing so it can be attached directly to metal to hold a light weight object like a battery, create a trap door, or build a detachable part.

  • Adhesive backing.
  • Attach a light object like a battery.
  • Build a trap door or a detachable part.

Our Price: $9.99
In Stock
Qty Add
11" Zip Ties (100-pack)

Black Zip Ties used to tie larger objects like a pneumatic cylinder to metal or attach to rollers to assist an intake. 11 inches long with a rating of 30lbs.

  • Tie larger objects to metal.
  • Attach to rollers to assist an intake.
  • Rating of 30lbs.

Our Price: $6.99
In Stock
Qty Add
Aluminum Plate 25x5 (6-pack)

Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong.

  • Compatible with all VEX Motion and Structure components.
  • Available in bundle kits or in single part multi-packs

Our Price: $24.99
In Stock
Qty Add
Aluminum Angle 2x2x35 (6-pack)

Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong.

  • Compatible with all VEX Motion and Structure components.
  • Available in bundle kits or in single part multi-packs

Our Price: $34.99
In Stock
Qty Add
Angle 2x2x25 (4-pack)

VEX angle without slots. Typically used for structural framing. Good strength on two axis.

  • Can be cut on 0.500" increments.
  • Made from cold rolled steel, 0.046" thick, zinc plated
  • All items are (4) to a package.

Our Price: $14.99
In Stock
Qty Add
C-Channel 1x5x1x25 (4-pack)

VEX C-channel has holes on 0.500" increments. This structural member is perfect for building bigger robots. Excellent strength and twist resistance.

  • Three sizes available.
  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • Each channel is segmented into cuttable 2.5" pieces

Our Price: $17.99
In Stock
Qty Add
Screw 6-32 x 0.250" Silver (50-pack)

6-32 Screw with Button Head. 5/64" VEX Allen Drive. Various lengths.

  • Use for Motors and Servos only.
  • High Strength Stainless Steel.

Our Price: $4.95
In Stock
Qty Add
Screw 8-32 x 0.750" (100-pack)

8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Standard Allen Drive VEX screw type.
  • High Strength Stainless Steel.
Note: picture is for illustrational purposes.

Our Price: $9.99
In Stock
Qty Add
Screw 8-32 x 0.875" (100-pack)

8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Standard Allen Drive VEX screw type.
  • High Strength Stainless Steel.
Note: picture is for illustrational purposes.

Our Price: $9.99
In Stock
Qty Add
Screw 8-32 x 0.500" Locking (100-pack)
These screws have thread locker applied on their threads; this thread locker will help hold the screw in position. A Locking Screw can be installed and removed approximately 10-15 times and still retain a firm lock each time. The screws provide similar functionality to the VEX Nylock Nuts. The locking screws come in 2 sizes, 1/4 inch and 1/2 inch in length.

Our Price: $19.99
In Stock
Qty Add
Rubber Link (4-pack)

A flexible link used to create flexible joints, springs, or to provide shock absorption.

  • Flexible joints between standoffs or metal.
  • Add spring force to your design.
  • Provide shock absorption to delicate parts.

Our Price: $7.49
In Stock
Qty Add
Screw 8-32 x 0.500" (100-pack)

8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Standard Allen Drive VEX screw type.
  • High Strength Stainless Steel.
Note: picture is for illustrational purposes.

Our Price: $7.49
In Stock
Qty Add
Screw 8-32 x 0.625" (100-pack)

8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Standard Allen Drive VEX screw type.
  • High Strength Stainless Steel.
Note: picture is for illustrational purposes.

Our Price: $9.99
In Stock
Qty Add
Screw 8-32 x 0.250" Locking (100-pack)
These screws have thread locker applied on their threads; this thread locker will help hold the screw in position. A Locking Screw can be installed and removed approximately 10-15 times and still retain a firm lock each time. The screws provide similar functionality to the VEX Nylock Nuts. The locking screws come in 2 sizes, 1/4 inch and 1/2 inch in length.

Our Price: $19.99
In Stock
Qty Add
Coupler 8-32 x 1.000" (25-pack)

The 8-32 Coupler is used to connect multiple Threaded Beams to each other. Now you can make custom length standoffs.

  • Double up standoffs
  • Allen socket in one end
  • 1/2" and 1" lengths

Our Price: $4.95
In Stock
Qty Add
Worm Gearbox Bracket (2-pack)

This Bracket is designed with the VEX Worm Gear. This is the simplest way to mount and utilize the worm gears.

  • Designed for the VEX Worm Gears.
  • Metal only. Gears not included.
  • Sold in a pack of 2 brackets.

Our Price: $12.99
In Stock
Qty Add
Bearing Pop Rivet (50-pack)

These make mounting Flats Bearing onto VEX structural component easy. Reusable; simply push the pin out from the back side.

  • Speed up robot assembly.
  • 50 ea of the Bearing Pop Rivets.
  • Reusable.

Our Price: $7.99
In Stock
Qty Add
Shoulder Screws 8-32 (25-pack)

Shoulder Screws make low-slop pivots in VEX metal. Designed to fit snugly in a VEX square hole. Allows several layers of metal to pivot.

  • Perfect for pivots with minimal slop.
  • 0.176" dia x 0.20" long shoulder.
  • 3/32" Standard VEX Allen Drive.

Our Price: $9.99
In Stock
Qty Add
Gusset Pack

Six gussets in one pack


Our Price: $7.49
In Stock
Qty Add
45 Degree Gusset (6-pack)

Need to make a 45 degree angle in your application? The 45 Degree Gusset Pack will make this task easy.

  • Sold in packs of 6 each.
  • 45 Degree Gusset

Our Price: $4.99
In Stock
Qty Add
Angle Coupler Gusset (8-pack)

Use these Angler Couplers to attach two VEX 2x2 Angles together in line to make longer structural pieces.

  • Allows for greater mounting versatility using VEX Structural parts.
  • Includes (8) Angler Coupler Gussets.

Our Price: $19.99
In Stock
Qty Add
Aluminum Structure Kit

Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong.

  • Compatible with all VEX Motion and Structure components.
  • Available in bundle kits or in single part multi-packs

Our Price: $79.99
In Stock
Qty Add
Long Aluminum Structure Kit

Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong.

  • Compatible with all VEX Motion and Structure components.
  • Available in bundle kits or in single part multi-packs

Our Price: $79.99
In Stock
Qty Add
Angle 2x2x35 (4-pack)

VEX angle without slots. Typically used for structural framing. Good strength on two axis.

  • Can be cut on 0.500" increments.
  • Made from cold rolled steel, 0.046" thick, zinc plated
  • All items are (4) to a package.

Our Price: $17.99
In Stock
Qty Add
Angle 3x3x35 (4-pack)

VEX angle without slots. Typically used for structural framing. Good strength on two axis.

  • Can be cut on 0.500" increments.
  • Made from cold rolled steel, 0.046" thick, zinc plated
  • All items are (4) to a package.

Our Price: $19.99
In Stock
Qty Add
Chassis Rail 2x1x35 (4-pack)

The Chassis Rails are part of the larger VEX Chassis Kits. This rail has holes on 0.500" increments and another row in-between. This part is a versatile angle with one narrow side and one taller side.

  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • All items are (4) to a package.

Our Price: $17.99
In Stock
Qty Add
Chassis Rail 2x1x25 (4-pack)

The Chassis Rails are part of the larger VEX Chassis Kits. This rail has holes on 0.500" increments and another row in-between. This part is a versatile angle with one narrow side and one taller side.

  • Made from cold rolled steel, 0.046" thick, zinc plated.
  • All items are (4) to a package.

Our Price: $14.99
In Stock
Qty Add
Chassis Kit, Medium 25x25

VEX Robotics chassis kits are larger versions of the VEX standard kit chassis. Mix and match to make a total of 16 different chassis sizes.

  • Four sizes available: 15x16, 25x25, 35x35, and 35x35 super.
    • Note: Chassis sizes are listed by number of VEX holes, (i.e. a 15x25 chassis is 15-holes wide x 25-holes long).
  • The Rails and Angles are also available individually.
  • 100% VEX Robotics compatible.
  • Hardware not included.

These chassis use a design similar to the ProtoBot chassis, including (2) bumpers and (4) rails. The flexibility and variety of design options makes these chassis great for any robot project.

  • Variable chassis width by mounting the rails inward.
  • Space between rails for protected chain or gear reduction.
  • Extra "fifth hole" in the center of four holes adds additional flexibility.
  • Wheels may be mounted outboard or between the rails.
  • Bumpers may be mounted up-side-down for more flexible designs.
  • The "Super" chassis is taller with more vertical mounting locations.

Our Price: $21.35
In Stock
Qty Add
Screw 8-32 x 1.000" (100-pack)

8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths.

  • Standard Allen Drive VEX screw type.
  • High Strength Stainless Steel.
Note: picture is for illustrational purposes.

Our Price: $9.99
In Stock
Qty Add
Nut 8-32 Nylock (100-pack)

A nut is a type of hardware fastener with a threaded hole. All VEX nuts are 8-32 threads.

  • Nylock nuts have internal nylon lock.

Our Price: $3.99
In Stock
Qty Add
Nut 8-32 Hex (100-pack)

A nut is a type of hardware fastener with a threaded hole. All VEX nuts are 8-32 threads.

  • Hex nuts are non-locking.

Our Price: $2.99
In Stock
Qty Add
Standoff 0.25" (10-pack)

A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads.

  • Hex size is 0.250" across the flats.
  • Light weight aluminum.
  • Various lengths available.

Our Price: $2.95
In Stock
Qty Add
High Strength Shaft Insert Kit

Removable inserts for High Strength Gears and some wheels that allow for versatility in user application. Switch from a driven gear (square hole) to a free spinning one (round hole) in seconds.

  • Increased versatility during design and construction
  • Free spinning plastic and high strength metal inserts available
  • Fits VEX EDR drive shafts (0.125" square bars)

Our Price: $9.99
In Stock
Qty Add
Booster Kit

This kit includes pieces specifically recommended by VEX builders to maximize versatility. Contains over 600 pieces of VEX Structural and Motion Components.

  • (1)Steel Chassis 25x25x2
  • (14)Steel Plates & Bars
  • (6)Steel Angles
  • (6)Steel C-Channels
  • (12)Steel Gussets
  • (25)Gears & Rollers & Clutches
  • (70)Collars & Shafts & Bearings
  • (66)Standoffs & Spacers
  • (408)Screws & Nuts & Washers


    Our Price: $179.99
    In Stock
    Qty Add
    Aluminum C-Channel 1x5x1x25 (6-pack)

    Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong.

    • Compatible with all VEX Motion and Structure components.
    • Available in bundle kits or in single part multi-packs

    Our Price: $39.99
    In Stock
    Qty Add
    Aluminum C-Channel 1x5x1x35 (6-pack)

    Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong.

    • Compatible with all VEX Motion and Structure components.
    • Available in bundle kits or in single part multi-packs

    Our Price: $44.99
    In Stock
    Qty Add
    Metal & Hardware Kit

    More tools for building the ultimate robot. Additional metal and hardware pieces let you create more complex devices.


    Our Price: $79.99
    In Stock
    Qty Add
    1/2" Thumbscrew (50-pack)

    These plastic thumbscrews are the same size (8-32) as standard VEX screws only they have a 0.428" diameter knurled head so they can be tightened or loosened by hand. Great for applications where a screw will be inserted or removed multiple times, such as robot access panels or battery mounts.

    • Speed up robot assembly.
    • 50 ea of the 1/2" Thumbscrews

    Our Price: $9.99
    In Stock
    Qty Add
    Base Plate 30x15 (2-pack)

    VEX Base Plates are designed to serve as a foundation for a variety of robotics applications. Use them to create a large stationary robotic arm, or interlock them to build larger manufacturing type systems. These pieces can also be used as large structural pieces in other robotic applications.

    • (2) Base Plates included
    • 15-holes wide x 30-holes long
    • Made from cold rolled steel, 0.046" thick, zinc plated.

    Our Price: $29.99
    In Stock
    Qty Add
    VELCRO brand ONE-WRAP (5')

    VELCRO brand ONE-WRAP consists of 5 feet of our 0.75 inch wide VELCRO brand ONE-WRAP that can be used to attach a light weight object. This Wrap comes with Hook on one side and Loop on the other so that it attaches back to itself for a secure closure.

    • Attach a light weight object.
    • Hook on one side and Loop on the other.
    • Attaches back to itself.

    Our Price: $4.99
    In Stock
    Qty Add
    Adhesive Foam

    Applications include robot bumpers, vibration isolation, accumulator backing, and any other applications requiring compression

    • 1" wide x 0.250" thick
    • 60" long. Cuts with scissors.
    • Adhesive backed.

    Our Price: $9.99
    In Stock
    Qty Add
    Aluminum Bar 1x25 (16-pack)

    Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong.

    • Compatible with all VEX Motion and Structure components.
    • Available in bundle kits or in single part multi-packs

    Our Price: $29.99
    In Stock
    Qty Add
    Aluminum Chassis Kit 25x25

    Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong.

    • Compatible with all VEX Motion and Structure components.
    • Available in bundle kits or in single part multi-packs

    Our Price: $34.99
    In Stock
    Qty Add
    Standoff Pack

    A standoff is used in mechanics and electronics to separate two parts from one another. All VEX Standoffs have 8-32 threads.

    • Hex size is 0.250" across the flats.
    • Light weight aluminum.
    • Various lengths available.

    Our Price: $15.99
    In Stock
    Qty Add
    Chassis Kit, Large 35x35

    VEX Robotics chassis kits are larger versions of the VEX standard kit chassis. Mix and match to make a total of 16 different chassis sizes.

    • Four sizes available: 15x16, 25x25, 35x35, and 35x35 super.
      • Note: Chassis sizes are listed by number of VEX holes, (i.e. a 15x25 chassis is 15-holes wide x 25-holes long).
    • The Rails and Angles are also available individually.
    • 100% VEX Robotics compatible.
    • Hardware not included.

    These chassis use a design similar to the ProtoBot chassis, including (2) bumpers and (4) rails. The flexibility and variety of design options makes these chassis great for any robot project.

    • Variable chassis width by mounting the rails inward.
    • Space between rails for protected chain or gear reduction.
    • Extra "fifth hole" in the center of four holes adds additional flexibility.
    • Wheels may be mounted outboard or between the rails.
    • Bumpers may be mounted up-side-down for more flexible designs.
    • The "Super" chassis is taller with more vertical mounting locations.

    Our Price: $24.95
    In Stock
    Qty Add
    Nut Bar (4-pack)

    The Nut Bar consists of a plastic piece with 20-holes sized such that VEX 8-32 screws will self-tap into them. By mounting these bars onto VEX structural metal, you create a series of holes which can be used as nuts. This allows a set of holes that can be mounted to without having access to the back side of the plate.

    • Can be used in tight places to help with robot assembly.
    • Snaps into smaller increments without tools.

    Our Price: $4.99
    (Out of Stock)
    Qty Add
    1/4" Pitch Metal Kit

    Contains a variety of structural 1/4" pitch VEX pieces. This smaller pitch can be used to construct more intricate mechanisms or to create smaller structural shapes. Compatible with ALL "full size" 1/2" pitch VEX components.

    • Create smaller VEX mechanisms
    • Create a small claw which attaches to a larger arm
    • Design more intricate creations than ever before!

    Our Price: $99.99
    (Out of Stock)
    Qty Add
    Segmented Angle, 1x1x35 (4-pack)

    VEX angle without slots. Typically used for structural framing. Good strength on two axis.

    • Can be cut on 0.500" increments.
    • Made from cold rolled steel, 0.046" thick, zinc plated.
    • All items are (4) to a package.
    Currently Unavailable

    Our Price: $17.99
    (Out of Stock)
    Qty Add
    Pivot Gusset (6-pack)

    Bracket allows parts to be connected at any angle from 0 to 90 degrees. Can also be used as a corner gusset.

    • Made from cold rolled steel, 0.046" thick, zinc plated.
    • Sold in packs of 6.

    Our Price: $5.95
    (Out of Stock)
    Qty Add
    Angle Gusset
    "

    Bent gusset for strengthening ""T"" joints. Slots on both main flanges allow for adjustment on two axis.

    • Can also be used as a motor mount.
    • Made from cold rolled steel, 0.046"" thick, zinc plated.
    • Sold in packs of 4 or 8.
    "

    Our Price: $7.95
    (Out of Stock)
    Qty Add
    Plus Gusset
    "

    Generic gusset for strengthening flat joints. Can be easily cut into a ""T"" gusset or an ""L"" gusset.

    • Made from cold rolled steel, 0.046"" thick, zinc plated.
    • Sold in packs of 4 or 8.
    "

    Our Price: $3.45
    (Out of Stock)
    Qty Add
    Aluminum C-Channel 1x2x1x25 (6-pack)

    Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong.

    • Compatible with all VEX Motion and Structure components.
    • Available in bundle kits or in single part multi-packs

    Our Price: $29.99
    (Out of Stock)
    Qty Add
    Aluminum C-Channel 1x2x1x35 (6-pack)

    Use VEX Aluminum pieces to lighten the total weight of a robot or mechanism while still keeping it strong.

    • Compatible with all VEX Motion and Structure components.
    • Available in bundle kits or in single part multi-packs

    Our Price: $34.99
    (Out of Stock)
    Qty Add
    Chassis Rail 3x2x35 (4-pack)

    The Chassis Rails are part of the larger VEX Chassis Kits. This rail has holes on 0.500" increments and another row in-between. This part is a versatile angle with one narrow side and one taller side.

    • Made from cold rolled steel, 0.046" thick, zinc plated.
    • All items are (4) to a package.
    Currently Unavailable

    Our Price: $24.99
    (Out of Stock)
    Qty Add
    Chassis Kit, Small 15x16

    VEX Robotics chassis kits are larger versions of the VEX standard kit chassis. Mix and match to make a total of 16 different chassis sizes.

    • Four sizes available: 15x16, 25x25, 35x35, and 35x35 super.
      • Note: Chassis sizes are listed by number of VEX holes, (i.e. a 15x25 chassis is 15-holes wide x 25-holes long).
    • The Rails and Angles are also available individually.
    • 100% VEX Robotics compatible.
    • Hardware not included.

    These chassis use a design similar to the ProtoBot chassis, including (2) bumpers and (4) rails. The flexibility and variety of design options makes these chassis great for any robot project.

    • Variable chassis width by mounting the rails inward.
    • Space between rails for protected chain or gear reduction.
    • Extra "fifth hole" in the center of four holes adds additional flexibility.
    • Wheels may be mounted outboard or between the rails.
    • Bumpers may be mounted up-side-down for more flexible designs.
    • The "Super" chassis is taller with more vertical mounting locations.

    Our Price: $18.99
    (Out of Stock)
    Qty Add
    Chassis Kit, Super 35x35

    VEX Robotics chassis kits are larger versions of the VEX standard kit chassis. Mix and match to make a total of 16 different chassis sizes.

    • Four sizes available: 15x16, 25x25, 35x35, and 35x35 super.
      • Note: Chassis sizes are listed by number of VEX holes, (i.e. a 15x25 chassis is 15-holes wide x 25-holes long).
    • The Rails and Angles are also available individually.
    • 100% VEX Robotics compatible.
    • Hardware not included.

    These chassis use a design similar to the ProtoBot chassis, including (2) bumpers and (4) rails. The flexibility and variety of design options makes these chassis great for any robot project.

    • Variable chassis width by mounting the rails inward.
    • Space between rails for protected chain or gear reduction.
    • Extra "fifth hole" in the center of four holes adds additional flexibility.
    • Wheels may be mounted outboard or between the rails.
    • Bumpers may be mounted up-side-down for more flexible designs.
    • The "Super" chassis is taller with more vertical mounting locations.
    Currently Unavailable

    Our Price: $33.95
    (Out of Stock)
    Qty Add
    To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>